Overview

Data Structures
struct	_src_setpoint_authentication
	The structure of setpoint authentication. More...

struct	_src_domain_mode_authentication
	The stucture of domain mode authentication. More...

Typedefs
typedef enum _src_core_name	src_core_name_t
	System core.

typedef enum _src_boot_fuse_selection	src_boot_fuse_selection_t
	The enumeration of the boot fuse selection.

typedef enum _src_global_system_reset_source	src_global_system_reset_source_t
	The enumeration of global system reset sources.

typedef enum _src_global_system_reset_mode	src_global_system_reset_mode_t
	The enumeration of global system reset mode.

typedef enum _src_reset_slice_name	src_reset_slice_name_t
	The enumeration of the slice name.

typedef enum _src_general_purpose_register_index	src_general_purpose_register_index_t
	The index of each general purpose register.

typedef struct _src_setpoint_authentication	src_setpoint_authentication_t
	The structure of setpoint authentication.

typedef struct _src_domain_mode_authentication	src_domain_mode_authentication_t
	The stucture of domain mode authentication.

typedef enum _src_slice_reset_state	src_slice_reset_state_t
	The enumeration of the reset state of each slice.

Enumerations
enum	_src_core_name { kSRC_CM7Core = 0x1U, kSRC_CM4Core = 0x2U }
	System core. More...

enum	_src_boot_fuse_selection { kSRC_SerialDownloaderBootFlow = 0U, kSRC_NormalBootFlow = 1U }
	The enumeration of the boot fuse selection. More...

enum	_src_global_system_reset_source { kSRC_WdogReset = 0U, kSRC_Wdog3Reset = 2U, kSRC_Wdog4Reset = 4U, kSRC_M4LockUpReset = 6U, kSRC_M7LockUpReset = 8U, kSRC_M4RequestReset = 10U, kSRC_M7RequestReset = 12U, kSRC_TempsenseReset = 14U, kSRC_CSUReset = 16U, kSRC_JageSoftwareReset = 18U, kSRC_OverVoltageReset = 20U }
	The enumeration of global system reset sources. More...

enum	_src_global_system_reset_status_flags { kSRC_M7CoreIppResetFlag = 1UL << 0UL, kSRC_M7CoreM7RequestResetFlag = 1UL << 1UL, kSRC_M7CoreM7LockUpResetFlag = 1UL << 2UL, kSRC_M7CoreCSUResetFlag = 1UL << 3UL, kSRC_M7CoreIppUserResetFlag = 1UL << 4UL, kSRC_M7CoreWdogResetFlag = 1UL << 5UL, kSRC_M7CoreJtagResetFlag = 1UL << 6UL, kSRC_M7CoreJtagSWResetFlag = 1UL << 7UL, kSRC_M7CoreWdog3ResetFlag = 1UL << 8UL, kSRC_M7CoreWdog4ResetFlag = 1UL << 9UL, kSRC_M7CoreTempsenseResetFlag = 1UL << 10UL, kSRC_M7CoreM4RequestResetFlag = 1UL << 11UL, kSRC_M7CoreM4LockUpResetFlag = 1UL << 12UL, kSRC_M7CoreOverVoltageResetFlag = 1UL << 13UL, kSRC_M7CoreCdogResetFlag = 1UL << 14UL, kSRC_M4CoreIppResetFlag = 1UL << 16UL, kSRC_M4CoreM4RequestResetFlag = 1UL << 17UL, kSRC_M4CoreM4LockUpResetFlag = 1UL << 18UL, kSRC_M4CoreCSUResetFlag = 1UL << 19UL, kSRC_M4CoreIppUserResetFlag = 1UL << 20UL, kSRC_M4CoreWdogResetFlag = 1UL << 21UL, kSRC_M4CoreJtagResetFlag = 1UL << 22UL, kSRC_M4CoreJtagSWResetFlag = 1UL << 23UL, kSRC_M4CoreWdog3ResetFlag = 1UL << 24UL, kSRC_M4CoreWdog4ResetFlag = 1UL << 25UL, kSRC_M4CoreTempsenseResetFlag = 1UL << 26UL, kSRC_M4CoreM7RequestResetFlag = 1UL << 27UL, kSRC_M4CoreM7LockUpResetFlag = 1UL << 28UL, kSRC_M4CoreOverVoltageResetFlag = 1UL << 29UL, kSRC_M4CoreCdogResetFlag = 1UL << 30UL }
	The enumeration of reset status flags. More...

enum	_src_global_system_reset_mode { kSRC_ResetSystem = 0x0U, kSRC_DoNotResetSystem = 0x3U }
	The enumeration of global system reset mode. More...

enum	_src_reset_slice_name { kSRC_MegaSlice = 0x0U, kSRC_DisplaySlice = 0x1U, kSRC_WakeUpSlice = 0x2U, kSRC_LpsrSlice = 0x3U, kSRC_M4CoreSlice = 0x4U, kSRC_M7CoreSlice = 0x5U, kSRC_M4DebugSlice = 0x6U, kSRC_M7DebugSlice = 0x7U, kSRC_Usbphy1Slice = 0x8U, kSRC_Usbphy2Slice = 0x9U }
	The enumeration of the slice name. More...

enum	_src_domain_mode_selection { kSRC_Cpu0RunModeAssertReset = 1UL << 0UL, kSRC_Cpu0WaitModeAssertReset = 1UL << 1UL, kSRC_Cpu0StopModeAssertReset = 1UL << 2UL, kSRC_Cpu0SuspendModeAssertReset = 1UL << 3UL, kSRC_Cpu1RunModeAssertReset = 1UL << 4UL, kSRC_Cpu1WaitModeAssertReset = 1UL << 5UL, kSRC_Cpu1StopModeAssertReset = 1UL << 6UL, kSRC_Cpu1SuspendModeAssertReset = 1UL << 7UL }
	The enumeration of the domain mode. More...

enum	_src_setpoint_selection { kSRC_SetPoint0AssertReset = 1UL << 0UL, kSRC_SetPoint1AssertReset = 1UL << 1UL, kSRC_SetPoint2AssertReset = 1UL << 2UL, kSRC_SetPoint3AssertReset = 1UL << 3UL, kSRC_SetPoint4AssertReset = 1UL << 4UL, kSRC_SetPoint5AssertReset = 1UL << 5UL, kSRC_SetPoint6AssertReset = 1UL << 6UL, kSRC_SetPoint7AssertReset = 1UL << 7UL, kSRC_SetPoint8AssertReset = 1UL << 8UL, kSRC_SetPoint9AssertReset = 1UL << 9UL, kSRC_SetPoint10AssertReset = 1UL << 10UL, kSRC_SetPoint11AssertReset = 1UL << 11UL, kSRC_SetPoint12AssertReset = 1UL << 12UL, kSRC_SetPoint13AssertReset = 1UL << 13UL, kSRC_SetPoint14AssertReset = 1UL << 14UL, kSRC_SetPoint15AssertReset = 1UL << 15UL }
	The enumeration of setpoint. More...

enum	_src_general_purpose_register_index { kSRC_GeneralPurposeRegister1 = 0U, kSRC_GeneralPurposeRegister2, kSRC_GeneralPurposeRegister3, kSRC_GeneralPurposeRegister4, kSRC_GeneralPurposeRegister5, kSRC_GeneralPurposeRegister6, kSRC_GeneralPurposeRegister7, kSRC_GeneralPurposeRegister8, kSRC_GeneralPurposeRegister9, kSRC_GeneralPurposeRegister10, kSRC_GeneralPurposeRegister11, kSRC_GeneralPurposeRegister12, kSRC_GeneralPurposeRegister13, kSRC_GeneralPurposeRegister14, kSRC_GeneralPurposeRegister15, kSRC_GeneralPurposeRegister16, kSRC_GeneralPurposeRegister17, kSRC_GeneralPurposeRegister18, kSRC_GeneralPurposeRegister19, kSRC_GeneralPurposeRegister20 }
	The index of each general purpose register. More...

enum	_src_slice_reset_source { kSRC_SoftwareReset = SRC_SLICE_STAT_RST_BY_SW_MASK, kSRC_PowerModeTransferReset = SRC_SLICE_STAT_RST_BY_HW_MASK }
	The enumeration of the reset source of each slice. More...

enum	_src_slice_reset_state { kSRC_SliceResetFinished = 0U, kSRC_SliceResetInProcess = 1U }
	The enumeration of the reset state of each slice. More...

Driver version
#define	FSL_SRC_DRIVER_VERSION (MAKE_VERSION(2, 1, 1))
	SRC driver version 2.1.1. More...

Core Reset release
void	SRC_ReleaseCoreReset (SRC_Type *base, src_core_name_t coreName)
	Releases related core reset operation. More...

Latched Boot Arguments Related Interfaces
static uint32_t	SRC_GetBootConfig (SRC_Type *base)
	Gets Boot configuration. More...

static uint8_t	SRC_GetBootMode (SRC_Type *base)
	Gets the latched state of the BOOT_MODE1 and BOOT_MODE0 signals. More...

static src_boot_fuse_selection_t	SRC_GetBootFuseSelection (SRC_Type *base)
	Gets the state of the BT_FUSE_SEL fuse. More...

static uint8_t	SRC_GetSECConfigFuseState (SRC_Type *base)
	Gets the state of the SECCONFIG[1] fuse. More...

Global System Related Interfaces
void	SRC_SetGlobalSystemResetMode (SRC_Type *base, src_global_system_reset_source_t resetSource, src_global_system_reset_mode_t resetMode)
	Sets the reset mode of global system reset source. More...

static uint32_t	SRC_GetResetStatusFlags (SRC_Type *base)
	Gets global system reset status flags. More...

static void	SRC_ClearGlobalSystemResetStatus (SRC_Type *base, uint32_t mask)
	Clears the status of global reset. More...

Slice Software Reset Related Interfaces
void	SRC_AssertSliceSoftwareReset (SRC_Type *base, src_reset_slice_name_t sliceName)
	Asserts software reset for the selected slice. More...

Slice Low-Power Mode Transition Related Interfaces
static void	SRC_AllowUserModeAccess (SRC_Type *base, src_reset_slice_name_t sliceName, bool enable)
	Allows/disallows user mode access. More...

static void	SRC_AllowNonSecureModeAccess (SRC_Type *base, src_reset_slice_name_t sliceName, bool enable)
	Allows/disallows non secure mode access. More...

static void	SRC_LockAccessSetting (SRC_Type *base, src_reset_slice_name_t sliceName)
	Locks the setting of user mode access and non secure mode access. More...

static void	SRC_SetDomainIdWhiteList (SRC_Type *base, src_reset_slice_name_t sliceName, uint8_t domainId)
	Sets the domain ID white list for the selected slice. More...

static void	SRC_LockDomainIdWhiteList (SRC_Type *base, src_reset_slice_name_t sliceName)
	Locks the value of white list. More...

static void	SRC_SetAssignList (SRC_Type *base, src_reset_slice_name_t sliceName, uint32_t assignList)
	Sets the value of assign list. More...

static void	SRC_LockAssignList (SRC_Type *base, src_reset_slice_name_t sliceName)
	Locks the value of assign list. More...

static void	SRC_EnableSetPointTransferReset (SRC_Type *base, src_reset_slice_name_t sliceName, bool enable)
	Enable/disable setpoint transfer reset. More...

static void	SRC_EnableDomainModeTransferReset (SRC_Type *base, src_reset_slice_name_t sliceName, bool enable)
	Enable/disable domain mode transfer reset. More...

void	SRC_SetSliceSetPointConfig (SRC_Type *base, src_reset_slice_name_t sliceName, uint32_t setpointConfig)
	Sets setpoint configuration for the selected reset slice. More...

void	SRC_SetSliceDomainModeConfig (SRC_Type *base, src_reset_slice_name_t sliceName, uint32_t domainConfig)
	Sets domain mode configuration for the selected reset slice. More...

void	SRC_LockSliceMode (SRC_Type *base, src_reset_slice_name_t sliceName)
	Locks the value of SETPOINT_MODE and DOMAIN_MODE for the selected reset slice. More...

Get/Clear Slice Reset Status Flags
static uint32_t	SRC_GetSliceResetStatusFlags (SRC_Type *base, src_reset_slice_name_t sliceName)
	Gets the reset status flags of the selected slice. More...

static void	SRC_ClearSliceResetStatusFlags (SRC_Type *base, src_reset_slice_name_t sliceName, uint32_t mask)
	Clears the reset status flags of the selected slice. More...

Get Slice Reset State
src_slice_reset_state_t	SRC_GetSliceResetState (SRC_Type *base, src_reset_slice_name_t sliceName)
	Gets the reset state of the selected slice. More...

General Purpose Registers Related Interfaces
static void	SRC_SetGeneralPurposeRegister (SRC_Type *base, src_general_purpose_register_index_t index, uint32_t value)
	Sets value to general purpose registers. More...

static uint32_t	SRC_GetGeneralPurposeRegister (SRC_Type *base, src_general_purpose_register_index_t index)
	Gets the value from general purpose registers. More...

Data Structure Documentation

struct _src_setpoint_authentication

Data Fields
bool	enableSetpointTranferReset
	Control whether reset slice is in setpoint mode. More...

uint32_t	whiteList
	Select the core to access set point control register. More...

bool	lockWhiteList
	Control whether lock the value in white list.

bool	lockSetting
	Control whether lock the setpoint access setting. More...

bool	allowNonSecureModeAccess
	Allow both secure and non-secure modes to config setpoint. More...

bool	allowUserModeAccess
	Allow both privilege and user modes to config setpoint. More...

Field Documentation

bool _src_setpoint_authentication::enableSetpointTranferReset

true Slice hardware reset will be triggered by set point transition.
false Slice hardware reset will not be trigged by set point transition.

uint32_t _src_setpoint_authentication::whiteList

The logic OR'ed value of src_core_name_t enumeration.

bool _src_setpoint_authentication::lockSetting

bool _src_setpoint_authentication::allowNonSecureModeAccess

bool _src_setpoint_authentication::allowUserModeAccess

struct _src_domain_mode_authentication

Data Fields
bool	enableDomainModeTransferReset
	Control whether reset slice is in domaim mode. More...

uint32_t	assignList
	Select the core that reset of slice would be subject to the selected core status transition. More...

bool	lockAssignList
	Control whether lock the value in Assign list. More...

Field Documentation

bool _src_domain_mode_authentication::enableDomainModeTransferReset

true Slice hardware reset will be triggered by cpu power mode transition.
false Slice hardware reset will not be trigged by cpu power mode transition.

uint32_t _src_domain_mode_authentication::assignList

The logic OR'ed value of src_core_name_t enumeration.

bool _src_domain_mode_authentication::lockAssignList

Macro Definition Documentation

#define FSL_SRC_DRIVER_VERSION (MAKE_VERSION(2, 1, 1))

Enumeration Type Documentation

enum _src_core_name

Enumerator
kSRC_CM7Core	System Core CM4.
kSRC_CM4Core	System Core CM7.

enum _src_boot_fuse_selection

Enumerator
kSRC_SerialDownloaderBootFlow	The Boot flow jumps directly to the serial downloader.
kSRC_NormalBootFlow	The Boot flow follows the Normal Boot flow.

enum _src_global_system_reset_source

Enumerator
kSRC_WdogReset	WDOG triggers the global system reset.
kSRC_Wdog3Reset	WDOG3 triggers the global system reset.
kSRC_Wdog4Reset	WODG4 triggers the global system reset.
kSRC_M4LockUpReset	M4 core lockup triggers the global system reset.
kSRC_M7LockUpReset	M7 core lockup triggers the global system reset.
kSRC_M4RequestReset	M4 core request triggers the global system reset.
kSRC_M7RequestReset	M7 core request triggers the global system reset.
kSRC_TempsenseReset	Tempsense trigggers the global system reset.
kSRC_CSUReset	CSU triggers the global system reset.
kSRC_JageSoftwareReset	JATG software triggers the global system reset.
kSRC_OverVoltageReset	Over voltage triggers the global system reset.

enum _src_global_system_reset_status_flags

Enumerator
kSRC_M7CoreIppResetFlag	The M7 Core reset is the result of ipp_reset_b pin.
kSRC_M7CoreM7RequestResetFlag	The M7 Core reset is the result of M7 core reset request.
kSRC_M7CoreM7LockUpResetFlag	The M7 Core reset is the result of M7 core lock up.
kSRC_M7CoreCSUResetFlag	The M7 Core reset is the result of csu_reset_b input.
kSRC_M7CoreIppUserResetFlag	The M7 Core reset is the result of ipp_user_reset_b qualified reset.
kSRC_M7CoreWdogResetFlag	The M7 Core reset is the result of the watchdog time-out event.
kSRC_M7CoreJtagResetFlag	The M7 Core reset is the result of HIGH-Z reset from JTAG.
kSRC_M7CoreJtagSWResetFlag	The M7 Core reset is the result of software reset from JTAG.
kSRC_M7CoreWdog3ResetFlag	The M7 Core reset is the result of watchdog3 time-out event.
kSRC_M7CoreWdog4ResetFlag	The M7 Core reset is the result of watchdog4 time-out event.
kSRC_M7CoreTempsenseResetFlag	The M7 Core reset is the result of on-chip temperature sensor.
kSRC_M7CoreM4RequestResetFlag	The M7 Core reset is the result of M4 CPU reset request.
kSRC_M7CoreM4LockUpResetFlag	The M7 Core reset is the result of M4 CPU lock up.
kSRC_M7CoreOverVoltageResetFlag	The M7 Core reset is the result of over voltage.
kSRC_M7CoreCdogResetFlag	The M7 Core reset is the result of Cdog.
kSRC_M4CoreIppResetFlag	The M4 Core reset is the result of ipp_reset_b pin.
kSRC_M4CoreM4RequestResetFlag	The M4 Core reset is the result of M4 core reset request.
kSRC_M4CoreM4LockUpResetFlag	The M4 Core reset is the result of M4 core lock up.
kSRC_M4CoreCSUResetFlag	The M4 Core reset is the result of csu_reset_b input.
kSRC_M4CoreIppUserResetFlag	The M4 Core reset is the result of ipp_user_reset_b qualified reset.
kSRC_M4CoreWdogResetFlag	The M4 Core reset is the result of the watchdog time-out event.
kSRC_M4CoreJtagResetFlag	The M4 Core reset is the result of HIGH-Z reset from JTAG.
kSRC_M4CoreJtagSWResetFlag	The M4 Core reset is the result of software reset from JTAG.
kSRC_M4CoreWdog3ResetFlag	The M4 Core reset is the result of watchdog3 time-out event.
kSRC_M4CoreWdog4ResetFlag	The M4 Core reset is the result of watchdog4 time-out event.
kSRC_M4CoreTempsenseResetFlag	The M4 Core reset is the result of on-chip temperature sensor.
kSRC_M4CoreM7RequestResetFlag	The M4 Core reset is the result of M7 CPU reset request.
kSRC_M4CoreM7LockUpResetFlag	The M4 Core reset is the result of M7 CPU lock up.
kSRC_M4CoreOverVoltageResetFlag	The M4 Core reset is the result of over voltage.
kSRC_M4CoreCdogResetFlag	The M4 Core reset is the result of Cdog.

enum _src_global_system_reset_mode

Enumerator
kSRC_ResetSystem	Generate the global system reset.
kSRC_DoNotResetSystem	Do not generate the global system reset.

enum _src_reset_slice_name

Enumerator
kSRC_MegaSlice	Megamix reset slice.
kSRC_DisplaySlice	Displaymix reset slice.
kSRC_WakeUpSlice	Wakeupmix reset slice.
kSRC_LpsrSlice	Lpsrmix reset slice.
kSRC_M4CoreSlice	M4 core reset slice.
kSRC_M7CoreSlice	M7 core reset slice.
kSRC_M4DebugSlice	M4 debug reset slice.
kSRC_M7DebugSlice	M7 debug reset slice.
kSRC_Usbphy1Slice	USBPHY1 reset slice.
kSRC_Usbphy2Slice	USBPHY2 reset slice.

enum _src_domain_mode_selection

Enumerator
kSRC_Cpu0RunModeAssertReset	CPU0 in run mode will assert slice reset.
kSRC_Cpu0WaitModeAssertReset	CPU0 in wait mode will assert reset.
kSRC_Cpu0StopModeAssertReset	CPU0 in stop mode will assert reset.
kSRC_Cpu0SuspendModeAssertReset	CPU0 in suspend mode will assert reset.
kSRC_Cpu1RunModeAssertReset	CPU1 in run mode will assert slice reset.
kSRC_Cpu1WaitModeAssertReset	CPU1 in wait mode will assert reset.
kSRC_Cpu1StopModeAssertReset	CPU1 in stop mode will assert reset.
kSRC_Cpu1SuspendModeAssertReset	CPU1 in suspend mode will assert reset.

enum _src_setpoint_selection

Enumerator
kSRC_SetPoint0AssertReset	In setpoint0 will assert slice reset.
kSRC_SetPoint1AssertReset	In setpoint1 will assert slice reset.
kSRC_SetPoint2AssertReset	In setpoint2 will assert slice reset.
kSRC_SetPoint3AssertReset	In setpoint3 will assert slice reset.
kSRC_SetPoint4AssertReset	In setpoint4 will assert slice reset.
kSRC_SetPoint5AssertReset	In setpoint5 will assert slice reset.
kSRC_SetPoint6AssertReset	In setpoint6 will assert slice reset.
kSRC_SetPoint7AssertReset	In setpoint7 will assert slice reset.
kSRC_SetPoint8AssertReset	In setpoint8 will assert slice reset.
kSRC_SetPoint9AssertReset	In setpoint9 will assert slice reset.
kSRC_SetPoint10AssertReset	In setpoint10 will assert slice reset.
kSRC_SetPoint11AssertReset	In setpoint11 will assert slice reset.
kSRC_SetPoint12AssertReset	In setpoint12 will assert slice reset.
kSRC_SetPoint13AssertReset	In setpoint13 will assert slice reset.
kSRC_SetPoint14AssertReset	In setpoint14 will assert slice reset.
kSRC_SetPoint15AssertReset	In setpoint15 will assert slice reset.

enum _src_general_purpose_register_index

Enumerator
kSRC_GeneralPurposeRegister1	The index of General Purpose Register1.
kSRC_GeneralPurposeRegister2	The index of General Purpose Register2.
kSRC_GeneralPurposeRegister3	The index of General Purpose Register3.
kSRC_GeneralPurposeRegister4	The index of General Purpose Register4.
kSRC_GeneralPurposeRegister5	The index of General Purpose Register5.
kSRC_GeneralPurposeRegister6	The index of General Purpose Register6.
kSRC_GeneralPurposeRegister7	The index of General Purpose Register7.
kSRC_GeneralPurposeRegister8	The index of General Purpose Register8.
kSRC_GeneralPurposeRegister9	The index of General Purpose Register9.
kSRC_GeneralPurposeRegister10	The index of General Purpose Register10.
kSRC_GeneralPurposeRegister11	The index of General Purpose Register11.
kSRC_GeneralPurposeRegister12	The index of General Purpose Register12.
kSRC_GeneralPurposeRegister13	The index of General Purpose Register13.
kSRC_GeneralPurposeRegister14	The index of General Purpose Register14.
kSRC_GeneralPurposeRegister15	The index of General Purpose Register15.
kSRC_GeneralPurposeRegister16	The index of General Purpose Register16.
kSRC_GeneralPurposeRegister17	The index of General Purpose Register17.
kSRC_GeneralPurposeRegister18	The index of General Purpose Register18.
kSRC_GeneralPurposeRegister19	The index of General Purpose Register19.
kSRC_GeneralPurposeRegister20	The index of General Purpose Register20.

enum _src_slice_reset_source

Enumerator
kSRC_SoftwareReset	Reset is caused by software setting.
kSRC_PowerModeTransferReset	Reset is caused by the power mode transfer.

enum _src_slice_reset_state

Enumerator
kSRC_SliceResetFinished	The reset is finished.
kSRC_SliceResetInProcess	The reset is in process.

Function Documentation

void SRC_ReleaseCoreReset	(	SRC_Type *	base,
		src_core_name_t	coreName
	)

The core reset will be held until the boot core to release it.

Parameters

base	SRC peripheral base address.
coreName	The name of the reset core to be released.

static uint32_t SRC_GetBootConfig ( SRC_Type * base )

inlinestatic

Parameters

base	SRC peripheral base address.

Returns: Boot configuration. Please refer to fusemap.

static uint8_t SRC_GetBootMode ( SRC_Type * base )

inlinestatic

Parameters

base	SRC peripheral base address.

Returns: Boot mode. Please refer to the Boot mode pin setting section of System Boot.

static src_boot_fuse_selection_t SRC_GetBootFuseSelection ( SRC_Type * base )

inlinestatic

Parameters

base	SRC peripheral base address.

Returns: The state of the BT_FUSE_SEL fuse, please refer to fusemap for more information.

static uint8_t SRC_GetSECConfigFuseState ( SRC_Type * base )

inlinestatic

Parameters

base	SRC peripheral base address.

Returns: The state of the SECCONFIG[1] fuse. Please refer to fusemap for more information.

void SRC_SetGlobalSystemResetMode	(	SRC_Type *	base,
		src_global_system_reset_source_t	resetSource,
		src_global_system_reset_mode_t	resetMode
	)

This function sets the selected mode of the input global system reset sources.

Parameters

base	SRC peripheral base address.
resetSource	The global system reset source. See src_global_system_reset_source_t for more details.
resetMode	The reset mode of each reset source. See src_global_system_reset_mode_t for more details.

static uint32_t SRC_GetResetStatusFlags ( SRC_Type * base )

inlinestatic

Parameters

base	SRC peripheral base address.

Returns: The status of global system reset status. See _src_global_system_reset_status_flags for more details.

static void SRC_ClearGlobalSystemResetStatus	(	SRC_Type *	base,
		uint32_t	mask
	)

inlinestatic

Parameters

base	SRC peripheral base address.
mask	The reset status flag to be cleared. See _src_global_system_reset_status_flags for more details.

void SRC_AssertSliceSoftwareReset	(	SRC_Type *	base,
		src_reset_slice_name_t	sliceName
	)

Note: This function will return as soon as the resset is finished.

Parameters

base	SRC peripheral base address.
sliceName	The slice to be reset. See src_reset_slice_name_t for more details.

static void SRC_AllowUserModeAccess	(	SRC_Type *	base,
		src_reset_slice_name_t	sliceName,
		bool	enable
	)

inlinestatic

Parameters

base	SRC peripheral base address.
sliceName	The slice name to set, please refer to src_reset_slice_name_t for details.
enable	Used to control user mode access. true Allow user mode access. false Disallow user mode access.

static void SRC_AllowNonSecureModeAccess	(	SRC_Type *	base,
		src_reset_slice_name_t	sliceName,
		bool	enable
	)

inlinestatic

Parameters

base	SRC peripheral base address.
sliceName	The slice name to set, please refer to src_reset_slice_name_t for details.
enable	Used to control non secure mode access. true Allow non secure mode access. false Disallow non secure mode access.

static void SRC_LockAccessSetting	(	SRC_Type *	base,
		src_reset_slice_name_t	sliceName
	)

inlinestatic

Note: Once locked only reset can unlock related settings.

Parameters

base	SRC peripheral base address.
sliceName	The slice name to set, please refer to src_reset_slice_name_t for details.

static void SRC_SetDomainIdWhiteList	(	SRC_Type *	base,
		src_reset_slice_name_t	sliceName,
		uint8_t	domainId
	)

inlinestatic

Parameters

base	SRC peripheral base address.
sliceName	The slice name to set, please refer to src_reset_slice_name_t for details.
domainId	The core to access registers, should be the OR'ed value of src_core_name_t.

static void SRC_LockDomainIdWhiteList	(	SRC_Type *	base,
		src_reset_slice_name_t	sliceName
	)

inlinestatic

Note: Once locked only reset can unlock related settings.

Parameters

base	SRC peripheral base address.
sliceName	The slice name to set, please refer to src_reset_slice_name_t for details.

static void SRC_SetAssignList	(	SRC_Type *	base,
		src_reset_slice_name_t	sliceName,
		uint32_t	assignList
	)

inlinestatic

Parameters

base	SRC peripheral base address.
sliceName	The slice name to set, please refer to src_reset_slice_name_t for details.
assignList	Cores that subject to corresponding core status transition, should be the OR'ed value of src_core_name_t.

static void SRC_LockAssignList	(	SRC_Type *	base,
		src_reset_slice_name_t	sliceName
	)

inlinestatic

Note: Once locked only reset can unlock related settings.

Parameters

base	SRC peripheral base address.
sliceName	The slice name to set, please refer to src_reset_slice_name_t for details.

static void SRC_EnableSetPointTransferReset	(	SRC_Type *	base,
		src_reset_slice_name_t	sliceName,
		bool	enable
	)

inlinestatic

Parameters

base	SRC peripheral base address.
sliceName	The slice name to set, please refer to src_reset_slice_name_t for details.
enable	User to control setpoint transfer reset. true Enable setpoint transfer reset. false Disable setpoint transfer reset.

static void SRC_EnableDomainModeTransferReset	(	SRC_Type *	base,
		src_reset_slice_name_t	sliceName,
		bool	enable
	)

inlinestatic

Parameters

base	SRC peripheral base address.
sliceName	The slice name to set, please refer to src_reset_slice_name_t for details.
enable	User to control domain mode reset. true Enable domain mode reset. false Disable domain mode reset.

void SRC_SetSliceSetPointConfig	(	SRC_Type *	base,
		src_reset_slice_name_t	sliceName,
		uint32_t	setpointConfig
	)

Parameters

base	SRC peripheral base address.
sliceName	The selected reset slice. See src_reset_slice_name_t for more details.
setpointConfig	The logic OR'ed value of _src_setpoint_selection enumeration, when the system in the selected setpoint slice reset will be asserted.

void SRC_SetSliceDomainModeConfig	(	SRC_Type *	base,
		src_reset_slice_name_t	sliceName,
		uint32_t	domainConfig
	)

Parameters

base	SRC peripheral base address.
sliceName	The selected reset slice. See src_reset_slice_name_t for more details.
domainConfig	The logic OR'ed value of _src_domain_mode_selection enumerations.

void SRC_LockSliceMode	(	SRC_Type *	base,
		src_reset_slice_name_t	sliceName
	)

Parameters

base	SRC peripheral base address.
sliceName	The selected reset slice. See src_reset_slice_name_t for more details.

static uint32_t SRC_GetSliceResetStatusFlags	(	SRC_Type *	base,
		src_reset_slice_name_t	sliceName
	)

inlinestatic

Parameters

base	SRC peripheral base address.
sliceName	The slice to be reset. See src_reset_slice_name_t for more details.

Returns: The reset status flags for the selected slice. Please refer to _src_slice_reset_source for details.

static void SRC_ClearSliceResetStatusFlags	(	SRC_Type *	base,
		src_reset_slice_name_t	sliceName,
		uint32_t	mask
	)

inlinestatic

Parameters

base	SRC peripheral base address.
sliceName	The selected slice. See src_reset_slice_name_t for more details.
mask	The reset status flags to be cleared. Please refer to _src_slice_reset_source for more details.

src_slice_reset_state_t SRC_GetSliceResetState	(	SRC_Type *	base,
		src_reset_slice_name_t	sliceName
	)

Parameters

base	SRC peripheral base address.
sliceName	The selected slice. See src_reset_slice_name_t for more details.

Return values

kSRC_SliceResetInProcess	The reset is in process.
kSRC_SliceResetFinished	The reset is finished.

static void SRC_SetGeneralPurposeRegister	(	SRC_Type *	base,
		src_general_purpose_register_index_t	index,
		uint32_t	value
	)

inlinestatic

Parameters

base	SRC peripheral base address.
index	The index of GPRx register array. Please refer to src_general_purpose_register_index_t.
value	Setting value for GPRx register.

static uint32_t SRC_GetGeneralPurposeRegister	(	SRC_Type *	base,
		src_general_purpose_register_index_t	index
	)

inlinestatic

Parameters

base	SRC peripheral base address.
index	The index of GPRx register array. Please refer to src_general_purpose_register_index_t.

Returns: The setting value for GPRx register.

Overview

Data Structures

Typedefs

Enumerations

Driver version

Core Reset release

Latched Boot Arguments Related Interfaces

Global System Related Interfaces

Slice Software Reset Related Interfaces

Slice Low-Power Mode Transition Related Interfaces

Get/Clear Slice Reset Status Flags

Get Slice Reset State

General Purpose Registers Related Interfaces

Data Structure Documentation

Data Fields

Field Documentation

Data Fields

Field Documentation

Macro Definition Documentation

Enumeration Type Documentation

Function Documentation